Pneumatic gate valve
Heavy duty construction, simple and reliable for years of operation
Easy installation, low maintenance
Spout area varied from 100x100 ~ 800x800 cm²
Widely used for material feeding or discharging in feed, food, flour, chemical, mineral, metallurgy, cement industries.
Application, adaptability and principle of application
Application
The pneumatic gate valve is mainly used to control the feeding and discharging of material.
Adaptability
This equipment is widely used in gain, flour, feed, oilseed and food processing mill and metallurgical, cement and chemical industry etc.
Principle of application
Bulk density of material: γ=0.2～1.8T/m3
Temperature of material: not higher than 80℃
Moisture content
Moisture content is relative with particle size and viscosity of material; generally the material, which is not loosed after agglomerated through kneading by hand, cannot be suitable
Technical parameters
Model | Cylinder model | Working pressure | Magnetic switch | Theoretical thrust | Theoretical tension | Capacity |
TZMQ19*30 | DNCB-40-200-PPV-A | 0.6-12 | SM1-8-K2.5-E | 754 | 633 | 30 |
TZMQ24*30 | DNCB-40-250-PPV-A | 0.6-12 | SM1-8-K2.5-E | 754 | 633 | 50 |
TZMQ28*40 | DNCB-50-320-PPV-A | 0.6-12 | SM1-8-K2.5-E | 1178 | 990 | 80 |
TZMQ36*50 | DNCB-50-400-PPV-A | 0.6-12 | SM1-8-K2.5-E | 1178 | 990 | 130 |
TZMQ39*50 | DNCB-50-400-PPV-A | 0.6-12 | SM1-8-K2.5-E | 1178 | 990 | 150 |
TZMQ46*60 | DNCB-63-500-PPV-A | 0.6-12 | SM1-8-K2.5-E | 1870 | 1682 | 200 |
TZMQ54*70 | DNCB-63-550-PPV-A | 0.6-12 | SM1-8-K2.5-E | 1870 | 1682 | 300 |
TZMQ63*110 | DNCB-80-700-PPV-A | 0.6-12 | SM1-8-K2.5-E | 3016 | 2721 | 500 |
Note: the above theoretical thrust and theoretical tension are calculated on a atmospheric pressure of 6 bar.
Hot Tags: tzmq pneumatic gate, China tzmq pneumatic gate manufacturers, suppliers, TZMS Series gate biomass, Extruder dies, Pneumatic gate valve, TZMD Series Electric Gate, Geared ring for pulverizer, Hammer for hammer mill/pulverizer
