The belt dryer has a closed loop hot air device, heat storage and energy saving device, heat supply and energy saving device, cloth device, segmented warehouse on-line temperature control, etc. It is widely used in the processing of dehydrated vegetables, Chinese herbal medicines, etc., in order to ensure normal In operation, it is often disassembled for repairs. At this time, you must pay attention to it and follow strict regulations.When you are drying materials, you often hear the rhythmic banging of the machine when it is working; this may be caused by the loose belt of the dryer. At this time, you need to turn off the power of the machine, open the maintenance panel on the back of the machine, and take out the damaged belt from the machine; after taking out the belt, you only need to put the new belt into the machine, and the new belt will replace the damaged belt and continue the daily routine of the machine. Work.
Usually, there is a problem with the roller bearings in the machine. We only need to check the bearing with our fingers, but before checking, we must confirm that the machine is in a power-off state. When our finger is placed on the bearing, the normal bearing will follow the sliding direction of the finger; otherwise the bearing will have problems. This is because you need to loosen the spring on the belt and then slide out the bracket on the bearing so that the bearing can be replaced.